Best Compression Tester Diesel in 2023 - Review & Buying Guide

Application: These compression tester kit is compatible with diesel trucks, cars, and tractors

Benefit: These compression tester kit can determination of the maximum pressure developed during the compression stroke in a diesel engine cylinder

Well-Made: Our compression tester kit is made of premium copper-steel material is made of durable copper-steel material, it can be used repeatedly for a long time

Pressure Range: These compression tester kits come with 0-1000 PSI/0-70 bar gauge with release valve and dual scale 80 mm diameter

Warranty: Sales is just the beginning of service. If you have any problems, contacting us and we will serve you within 24 hours

Best kit for the most popular truck/tractor engines for use on Cummins 5.9, Ford Powerstroke 6.0L, 6.4L, 6.7L, 7.3L (both styles), International Navistar 6.9/7.3L, International Navistar 4.5L VT275, 6.0L VT365E, 6.4L MaxxForce 7

Compatible with Repair and Replace on Cummins V6, V8, V12, 855, 5.9L, Detroit Diesel 53, 71, 92, 110, 149, V53, V71 with low or high clamp inj. hold down

Compatible with Repair and Replace on GM Duramax 4.3/5.7/6.2/6.5L/6.6L , CAT D-336, 1674, 1676, 3406, 3408, 3412; PERKINS 4.203, 4.236, 4.248, 6.354, 8.540

Compatible with Repair and Replace for Mercedes 12MM, 18MM, CASE, DEER, MACK, PERKINS, ONAN, Allis-Chalmers, + more, see list product details

Dual scale 80 mm diameter Liquid Filled Gauge 0 - 1000 Lb/In and 0 - 70 bar, 14.5" long hose. Built in Check valve

CONVENIENT: Swivel end coupler allows quick and easy change-out of adapters

DURABLE CONSTRUCTION: Made with tough carbon steel with a chrome plated gauge for measuring in harsh environments

ACCURATE MEASUREMENTS: 0-1000 psi/0-70 bar gauge with release valve

EASY TO HANDLE: 14.5-inch hose makes it easy to position as you need for any task

DURABLE COVERING: The non-sparking, chemical resistant molded urethane covering is bright orange for high visibility and safety

includes claw, clamp and spacers for dummy profiling

Diesel Engine Compression Tester kit

A large 2.5" diameter with 0-70 kg/cm2 or 0-1000 psi,

Suitable For Most Diesel Engines

Comes in a blow moulded case for easy storage

This compression testing set has fittings for replacing injectors and glow plugs.

0-1000 PSI/0-70 bar gauge with release valve and flexible hose.

Comes with 9 different glow plugs and 4 injector adaptors.

Our diesel compression tester set includes all the necessary components to test diesel compression on most diesel fueled trucks, cars and tractors.

Comes with a durable plastic case for easy transportation and storage.

Gauge with PSI and BAR readings,0 – 1000PSI 0-70 BAR

Quick release push button valve, Flexible hose

Glow Plug Adaptors sizes: M10 x 1.0: 83, 91, 102, 113 & 119mm. M10 x 1.25: 64 & 135mm. M12 x 1.25: 47mm. M22 x 1.5: 118mm

Injector Adaptor Sizes: M20 x 1.5: 75mm. M22 x 1.5: 73mm. M24 x 1.5: 88mm. M24 x 2: 63mm

14 adapters,Suits both direct and indirect injection diesel engines

Tests cylinder pressure on diesel cars and trucks

Deflator allows for an air release and automatic reset of the gauge for repeat testing

Swivel end quick coupler provides easy connection to all Lang diesel compression adapters

16-1/2" wire reinforced hydraulic hose

Easy to read dual scale red and black 2-1/4" gauge has ranges from 0-1000 PSI and 0-70 bar

This diesel compression tester kit comes complete with adapters for both direct and indirect diesel injected engines

It checks diesel engine compression under cranking conditions and comes with small profile, quick coupling adapters for speed and security

The built-in pressure relief valve enables repeat tests without dismantling

The flexible hose (355 mm) gives access to restricted plug and injector ports

Dual scale 80 mm diameter Gauge 0 - 1000 psi and 0 - 70 bar

Contains a diesel compression tester and 9 diesel compression adapters

Compression tester has a 16 1/2" wire reinforced hydraulic hose with a swivel-end quick coupler, allowing for easy connection to all Lang brand adapters

The 2-1/4" gauge has a dual scale dial with ranges from 0-1000 PSI and 0-70 bar with an easy to read red and black face

Includes adapters for GM, Isuzu, Lincoln Mark VII Continental and Ford/Navistar, Audi, Mercedes, Peugeot, Toyota, VW, Toyota.

◇ Best kit for the most popular truck and tractor engines for Cummins 5.9, Ford Powerstroke International Navistar 6.9/7.3L , Ford 6.0L

◇ Also compatible for Cummins V6, V8, V12, 855, Detroit Diesel 53, 71, 92, 110, 149, V53

◇ Also compatible for GM 4.3/5.7/6.2/6.5L , CAT D-336, 1674, 3406, 3408, 3412

◇ Compatible for Mercedes 12MM, 18MM , CASE, DEER, MACK + more, see list product details

◇ Dual scale 80 mm diameter Liquid Filled Gauge 0-1000 psi/0-70 bar, 14.5" long hose